MECHANICAL PRESS BRAKE

Description

Kawa Press Brakes are designed and developed through many year of experience in sheet metal working machines. Our machines is widely accepted in industries for continuous production. FRAME : It is fabricated with prime M. S. Plates. Its interlocked construction where the bed is directly supported on the side walls, ensures consistent accuracy and perfect alignment. Due to its generous proportions it imparts ample strength to the complete assembly and ensures against defalcation even while working at full rated capacity. RAM AND BED: Made from steel plates of suitable thickness, machined for straightness and parallelism of the working surfaces. Ram is guided and supported throughout the stroke by accurately machined guide ways. DRIVE SYSTEM : Power is transmitted to the ram through two individual gear drives for uniform load distribution throughout the length. This also reduces the torsional stresses on the eccentric shaft. Electric motor used is of sufficient H.P. which reduces slowdown of flywheel and increases energy available per stroke. The gear and pinion are made out of carbon-alloy steel. RAM ADJUSTMENT: Motorised ram adjustment is provided to facilitate quick and accurate adjustment of required bending angle. A spring loaded dog clutch enables to angular setting of ram. CLUTCH AND BRAKE: CLUTCH : Press brakes are provided with high torque low-inertia friction clutch. BRAKE : Heavy duty mechanical brake ensuring immediate braking of ram on releasing the pedal. Clutch operating levers are designed in such a way that minimum engaging force is required at the pedal. REAR GAUGE: Hand operated screw type rear gauge is provided to facilitate repetitive jobs. LUBRICATION : All bearing parts and guide surfaces are lubricated through connected oil cups and hand operated lubrication pump