Compressed Air Filters
  • Model No: SB, PF, UF, AC
  • Category: Filters Air Gas Liquid
  • Keywords: Compressed Air Filter, Air Filter, Line Filter, Compressed Air Line Filter, Filter, Pre Filter, Particulate Filter, Oil Removal Filter, Activated Carbon Filter, Fine Filter, dust filter, dust removal filter, Coalescer Filter, Separator Filter, Pipe Line Filter
  • Manufacturer Name: GTS Filters And Systems (India) Pvt. Ltd.
  • Packing size: As per Design
  • Price: ₹3,500


We offer compressed air filters with range of removal dirt, dust, rust, condensate, moisture content, exhaust fumes and oil impurities. We design compressed air filter with various parameters of compressed air like flow rate, line size, operating pressure, Operating Temperature, and Filtration Rating. We offer compressed air filter with Aluminium, CS and SS housings. Compressed air filter elements made of various filter medias like paper, synthetic, polyester, pp, coalescing, borosilicate glass fibre, activated carbon, HDPE, non-woven, stainless steel wire mesh, sintered bronze, sintered wire mesh and sintered powder. We also offer scrubber system for moisture separation from compressed air. Compressed air filters classified under below categories. a) MS – Moisture Separator For the removal of 99% of bulk oil/water removal from the compressed air. b) SB – Pre Filtration Sintered bronze filter elements for removal of pipe scales, bulk liquid, solid p[articles, dust down 5 micron. This filter elements available in 5, 10, 25 and above microns. c) PF – High Efficiency Fine Filter For the removal of particles down to 1 micron including coalesced liquid water and oil, dust, providing a maximum remaining oil aerosol content of 0.5 mg/m³ at 21 °C. d) UF – High Efficiency Oil Removal Filtration For the removal of particles down to 0.01 micron including oil aerosols, dust, providing a maximum remaining oil aerosol content of 0.01 mg/m³ (0.01 ppm) at 21 °C efficiency – 99.99% (install in series with filter type PF). [Borosilicate glass microfibers – filter media which actively repel oil to reduce pressure drop and running cost to an absolute minimum.] e) AC – Activated Carbon Filtration For the removal of vapour and hydro carbon odours giving a maximum remaining oil content of <0.003 mg/m³ (<0.003 ppm) (excluding methane) at 21 °C (install in series with filter type PF + UF). Technical Parameters: Line Size: ¼” NB to 30” NB End Connections: 150# & 300# Flanged, Table E & Table F Flanges, DIN Standard Flanges Butt Weld, NPT/BSP Threaded, Hose Pipe Conn., Tri Clover Adaptor, SMS Union/Dairy Conn. Material of Construction : Aluminium, CS, MS, SS304, SS304L, SS316, SS316L, SS317L Operating Pressure: 0 to 50 Bar Operating Temperature: 15 Deg. C to 500 Deg. C Flow Rate : Up to 80,000 NM3/Hr. & More Filtration Rating : 0.01 Micron to 6000 Micron & More Top cover with nut & bolts type or quick opening type Advantages: a) Easy to clean b) Low Pressure drop c) Large area d) Easy to operate and maintenance e) Positive Sealing to prevent bypass f) Customized design g) High dirt load holding capacity Applications: a) Refineries and Petrochemicals b) Power Plants c) Oil & Gas d) Water filtration and Cooling Towers e) Chemical Industries f) Automobile Industries g) Steel Industries, Metals & Minerals h) Textile Industries i) Dairy and Food Industries j) Dyes, Inks and paints Industries k) Cement Industries l) Fertilizers Industries m) Pharmaceuticals n) Coolant Oils and Cutting Fluids